We don't send anything by standard post, all of our deliveries are by trusted couriers which are fully traceable to ensure your orders arrive safe and on time.
Delivery Prices & Transit Times
Delivery costs can be found at checkout.
EXPRESS DELIVERY - Next Working Day Courier, delivered between 08:30-17:00
Scottish Delivery: 1-2 Day Courier (after dispatch)
UK Before 10:30AM: (please call first to check availability)
UK Express Saturday Delivery: (please call first to check availability)
Click & Collect: Free!
Channel Islands: 1-3 Day Courier (Jersey, Guernsey and Isle of Man)
Western Europe: (Netherlands, France, Belgium, Spain, Portugal)
Eastern Europe: Find out in checkout
Rest of the world: Find out in checkout
DELIVERY CUT-OFF
- For all orders placed by 2pm we will endeavour to dispatch same day for delivery the following day.
- All orders after 2pm will dispatch the following working day.
- For urgent shipments and 'last minute' requirements, please call our Sales Team - it's always worth asking if we can still get it out the door today!
Please be aware that some of our products have a lead time, and therefore the quoted transit times above are only applicable after the goods have been dispatched. We always make it clear in the description if our products have a lead time.
We regret that we cannot provide time slots for deliveries unless you have selected pre 10:30AM delivery, all standard express deliveries are delivered between 08:30-17:00 the next working day from dispatch.
Collection of most goods can be made from our warehouse upon request. Did you know that we have a range of slings, shackles and hoists available for instant Click & Collect? While nearly all items on our website can be collected next working day! Call our sales team now on 01384567430
Manufactured right here in the UK, this exceptional Telehandler Forklift Sweeper Collector will get the job done, 100% of the time, when it comes to maintaining cleanliness on your site. Sweeping, collecting, and dumping will ensure that your work environment is always well managed and professional.
Made from high-strength steel for optimal durability, this easy-to-use and low-to-maintain machine is the perfect investment. A truly solid design with faultless maneuverability, it's effortless to control, safe, strong, and easily visible.
See below for operating instructions and maintenance tips.
1: Place the fork stimes in the sleeves and lift both heel locks into place, marked 'A' in diagram 1
2: Connect the hydraulic couplings to the auxiliary services.
3: Raise the sweeper until you can see the collector bucket underneath and use the control for the auxiliary services to test the operational direction, 'B' in diagram 2. One way will open the collector, the other will close the collector then start the sweeper.
4: Close the collector and carefully lower the sweeper to the ground.
5: Set the time sleeves so they are level and centred in line with the tine height arrows 'C' in diagram 1. This will allow float.
6: When sweeping do not exceed 5mph or use high engine revs. Avoid potholes, raised drain covers and sweeping over bands, wire, ropes etc.
7: When you have finished sweeping release the hydraulic pressure before decoupling.
MAINTENANCE
1: Check that the bolts are tight and grease the bristle shaft bearing regularly.
2: As bristles wear it will be necessary to adjust the bristle height. To do this, place the sweeper on level ground. Loosen the height adjustment bolts on both sides, marked 'D' in diagrams 2 & 3. Ensure the brush only lightly touches the ground. Tighten both the height adjustment bolts. (The spanner 'E' is inside the motor cover)
3: To replace the bristles, open the collector bucket and place the sweeper on the ground. Remove the height adjustment bolts from both sides, marked 'D' in diagrams 2 & 3. Slowly raise the sweeper until the bristle cartridge has swung down, as shown in diagram 4. Remove the bolts marked 'F' and swing the bristle cartridge out 'G' as shown in diagram 4. Remove the bearing and collar. Slide off the end plate, bristle segments and spacers. Starting with a bristle reload the bristle cartridge, alternating bristle segments and spacers (ensure that they are tightly packed - bristle segments can be damaged if they aren't clamped into place). Replace the end plate, collar and bearing. Locate the bristle cartridge onto the hydraulic motor block and swing back into place. Replace the bolts marked 'F' in diagram 4. Lower the sweeper whilst slowly going forward (this will allow the bristle cartridge to swing back into place). Finally, replace the height adjustment bolts on both sides and set the bristle height.